Abel Alebachew Belay | Engineering | Innovative Research Award

Published on by Innovation Technologist

 

Innovative Research Award

Abel Alebachew Belay
Bialystok University of Technology, Poland
Abel Alebachew Belay
Affiliation Bialystok University of Technology
Country Poland
Scopus ID 59146815600
Documents 3
Citations 6
h-index 1
Subject Area Engineering
Event Global Innovation Technologist Awards
ORCID 0000-0002-4127-7423

The Innovative Research Award article recognizes the scholarly contributions of Abel Alebachew Belay, a researcher affiliated with the Bialystok University of Technology in Poland. His work primarily focuses on reinforced concrete structures, fiber-reinforced polymer reinforcement systems, structural mechanics, crack propagation analysis, and sustainable engineering materials. His publications demonstrate continuing contributions to experimental and analytical research within structural engineering and advanced construction materials.[1]

Abstract

Abel Alebachew Belay’s published research investigates the mechanical behavior, durability, and structural performance of reinforced concrete beams incorporating conventional steel reinforcement, basalt fiber reinforced polymer (BFRP) bars, polypropylene fibers, and other innovative reinforcement technologies. His work combines laboratory experimentation with analytical evaluation to improve crack resistance, deflection performance, and sustainable structural design within civil engineering.[1]

Keywords

  • Reinforced Concrete
  • Basalt Fiber Reinforced Polymer
  • Structural Engineering
  • Concrete Beams
  • Fiber Reinforcement
  • Civil Engineering

Introduction

Modern structural engineering increasingly emphasizes sustainable reinforcement systems capable of improving durability while reducing maintenance costs. Abel Alebachew Belay’s investigations contribute to this field by experimentally evaluating innovative reinforcement materials, comparing traditional steel reinforcement with fiber-reinforced alternatives, and assessing structural response under service and ultimate loading conditions.[2]

Research Profile

  • Affiliation: Bialystok University of Technology
  • Country: Poland
  • Primary Discipline: Engineering
  • Scopus Documents: 3
  • Scopus Citations: 6
  • Scopus h-index: 1

Research Contributions

  • Experimental evaluation of reinforced concrete beam performance.
  • Investigation of basalt fiber reinforced polymer reinforcement.
  • Comparative assessment of steel and polypropylene fiber reinforcement.
  • Studies on crack development and structural deflection.
  • Research supporting sustainable construction materials.

Publications

  1. Comparative Experimental Investigation of Reinforced Concrete Beams with Steel and Polypropylene Fiber Reinforcement. Fibers (2026).
  2. 11TH International Conference AMCM 2025. Analytical Models and New Concepts in Concrete and Masonry Structures. Conference Proceedings (2025).
  3. Deflection and Crack Analysis of Single Span Concrete Beams Reinforced with Basalt Fiber Reinforced Polymer Bars. Advances in Science and Technology Research Journal (2025).
  4. Assessing the Performance of Small Concrete Beams Reinforced with Steel and Fiber Reinforced Polymer Bars. AMT 2024 Conference (2024).
  5. Selected Mechanical Properties of Basalt Microbars Reinforced Concrete. Materiały Budowlane (2024).

Research Impact

The available publication record demonstrates research activity in reinforced concrete engineering with emphasis on innovative reinforcement materials and structural performance evaluation. The documented work contributes experimental evidence supporting the understanding of fiber-reinforced concrete systems, crack development, and beam deflection characteristics relevant to modern infrastructure engineering.[3]

Award Suitability

Based on the documented publication portfolio, engineering specialization, peer-reviewed journal articles, conference participation, and contributions to reinforced concrete research, Abel Alebachew Belay demonstrates scholarly activity aligned with the objectives of the Global Innovation Technologist Awards. This assessment reflects the documented academic record and publication achievements presented in publicly available sources rather than any endorsement or guarantee of award selection.[2]

Conclusion

Abel Alebachew Belay has contributed to structural engineering research through investigations of reinforced concrete behavior, innovative reinforcement materials, and experimental validation of structural performance. His published studies support ongoing advances in durable and sustainable construction technologies while contributing knowledge applicable to future civil engineering research and practice.[1]

External Links

References

  1. Belay AA, et al. Comparative Experimental Investigation of Reinforced Concrete Beams with Steel and Polypropylene Fiber Reinforcement. Fibers. 2026.
    DOI: https://doi.org/10.3390/fib14080089
  2. Belay AA, et al. Deflection and Crack Analysis of Single Span Concrete Beams Reinforced with Basalt Fiber Reinforced Polymer Bars. Advances in Science and Technology Research Journal. 2025.
    DOI: https://doi.org/10.12913/22998624/204204
  3. Belay AA, et al. Selected Mechanical Properties of Basalt Microbars Reinforced Concrete. Materiały Budowlane. 2024.
    DOI: https://doi.org/10.15199/33.2024.07.02
  4. Belay AA, et al. 11TH International Conference AMCM 2025. Analytical Models and New Concepts in Concrete and Masonry Structures.
    DOI: https://doi.org/10.24427/978-83-68673-07-4

Ahnaf Tahmid | Cellular Manufacturing | Best Industrial Research Award

Published on by Innovation Technologist

Mr. Ahnaf Tahmid | Cellular Manufacturing | Best Industrial Research Award

Lecturer | American International University | Bangladesh

Mr. Ahnaf Tahmid focuses his research on applying operations research, data science, and machine learning to solve complex decision-making problems in industrial and societal systems. His work emphasizes optimization, quality management, supply chain management, and human–AI integration, with a strong focus on sustainability and data-driven insights. He is particularly interested in leveraging advanced analytics and optimization techniques to enhance operational efficiency, safety, and strategic decision-making in developing economies.

View ORCID Profile

Featured Publications

Rezgar Hasanzadeh | Manufacturing | Young Scientist Award

Published on by Innovation Technologist

Assist. Prof. Dr. Rezgar Hasanzadeh | Manufacturing | Young Scientist Award

Assitant Professor at Kermanshah University of Technology, Iran

Dr. Rezgar Hasanzadeh is an Assistant Professor at Kermanshah University of Technology, with a background in Mechanical Engineering from Urmia University. His research focuses on polymers, polymeric foams, and plastic waste management. 🎓🌍

Dr. Hasanzadeh earned his B.Sc., M.Sc., and Ph.D. from Urmia University, graduating with top honors and receiving several prestigious awards, including the Distinguished Researcher of West Azerbaijan Province and Shahid Chamran Award from Iran’s National Elites Foundation. 🏅🌟

Publication Profile : 

Scopus

🎓 Educational Background :

  • B.Sc. in Mechanical Engineering
    Urmia University (2009-2013) – GPA: 16.38/20
  • M.Sc. in Mechanical Engineering
    Urmia University (2013-2015) – GPA: 18.86/20
  • Ph.D. in Mechanical Engineering
    Urmia University (2015-2019) – GPA: 19.76/20
    Thesis: Effect of Structural Properties on the Thermal-Insulation Properties of Polymeric Hybrid Nanocomposite Foams

👨‍🏫 Professional Experience :

  • Assistant Professor
    Kermanshah University of Technology (2024–Ongoing)
  • Lecturer
    Urmia University (2017–2024)
  • Teaching Fellow
    Urmia University, Professor Taher Azdast (2015–2024)
  • Lecturer
    Technical and Vocational University, Urmia Branch (2016–2023)

🔬 Research Interests : 

  • Polymers & Polymeric Foams
  • Plastic Waste Treatment & Management ♻️
  • Gasification Process 🌱
  • Thermal-Insulation Polymeric Foams
  • Polymeric Nanocomposites
  • 3D & 4D Printing 🖨️
  • Injection Molding/Extrusion Process
  • Plastic Processing & Technology
  • Multi-Objective Optimization

📝 Publication Top Notes :

  1. Hasanzadeh, R., & Mojaver, P. (Eds.). (2023). Plastic Waste Treatment and Management: Gasification Processes. Springer Nature.
  2. Hasanzadeh, R., Doniavi, A., & Rosen, M.A. (2023). Multi-criteria Decision-Making Analysis of Plastic Waste Gasification. In R. Hasanzadeh & P. Mojaver (Eds.), Plastic Waste Treatment and Management (Engineering Materials). Springer, Cham. https://doi.org/10.1007/978-3-031-31160-4_8
  3. Hasanzadeh, R., & Azdast, T. (2023). Evaluation of Steam Polyurethane Foam Waste Gasification. In R. Hasanzadeh & P. Mojaver (Eds.), Plastic Waste Treatment and Management (Engineering Materials). Springer, Cham. https://doi.org/10.1007/978-3-031-31160-4_7
  4. Hasanzadeh, R., Azdast, T., & Park, C.B. (2023). Evaluation of Air Polyurethane Foam Waste Gasification. In R. Hasanzadeh & P. Mojaver (Eds.), Plastic Waste Treatment and Management (Engineering Materials). Springer, Cham. https://doi.org/10.1007/978-3-031-31160-4_6
  5. Gharibi, A.R., Babazade, R., & Hasanzadeh, R. (2023). Collected Plastic Waste Forecasting by 2050. In R. Hasanzadeh & P. Mojaver (Eds.), Plastic Waste Treatment and Management (Engineering Materials). Springer, Cham. https://doi.org/10.1007/978-3-031-31160-4_2
  6. Azdast, T., Hasanzadeh, R., Lee, R.E., Lee, P.C., Wang, G., & Park, C.B. (2023). High-Pressure Foam Injection Molding of Polylactide/Nano-Fibril Composites with Mold Opening. In Polymeric Foams (pp. 129-139). CRC Press.
  7. Azdast, T., & Hasanzadeh, R. (2018). Polymeric Microcellular Foams: Principles, Basics and Properties. Urmia University Press.
  8. Gharibi, A., Doniavi, E., & Hasanzadeh, R. (2024). Metaheuristic particle swarm optimization for enhancing energetic and exergetic performances of hydrogen energy production from plastic waste gasification. Energy Conversion and Management, 308, 118392. [8 citations]
  9. Aghaiee, S., Azdast, T., Hasanzadeh, R., & Farhangpazhouh, F. (2024). Fabrication of bone tissue engineering scaffolds with a hierarchical structure using combination of 3D printing/gas foaming techniques. Journal of Applied Polymer Science, 141(16), e55238. [1 citation]
  10. Gharibi, A., Babazadeh, R., & Hasanzadeh, R. (2024). Machine learning and multi-criteria decision analysis for polyethylene air-gasification considering energy and environmental aspects. Process Safety and Environmental Protection, 183, 46–58. [8 citations]
  11. Khaleghi, S., Azdast, T., Doniavi, A., & Hasanzadeh, R. (2024). Performance optimization of acrylonitrile butadiene styrene/thermoplastic polyurethane composite foams blown with carbon dioxide using Taguchi technique. Journal of Applied Polymer Science, 141(8), e54996. [1 citation]
  12. Mojaver, M., Azdast, T., & Hasanzadeh, R. (2024). An experimental and numerical study on an innovative metastructure for 3D printed thermoplastic polyurethane with auxetic performance. Polymers for Advanced Technologies, 35(2), e6298. [0 citations]
  13. Doniavi, E., Babazadeh, R., & Hasanzadeh, R. (2024). Polyethylene gasification for sustainable plastic waste management with respect to energy, exergy, and environmental considerations: A non-linear programming optimization. Process Safety and Environmental Protection, 182, 86–97. [7 citations]
  14. Mojaver, P., Hasanzadeh, R., Chitsaz, A., Azdast, T., & Mojaver, M. (2024). Tri-objective central composite design optimization of co-gasification of eucalyptus biomass and polypropylene waste. Biomass Conversion and Biorefinery, 14(4), 4829–4841. [12 citations]
  15. Khaleghi, S., Azdast, T., Hasanzadeh, R., Park, C.B., & Rasouli, A. (2024). Tuning cellular structure in a previously developed microcellular acrylonitrile butadiene styrene/thermoplastic polyurethane blend foams. Polymer Engineering and Science. [0 citations; Article in Press]
  16. Azerang, B., Azdast, T., Doniavi, A., & Hasanzadeh, R. (2024). Acrylonitrile butadiene styrene/multi-walled carbon nanotubes nanocomposite foams for electromagnetic interference shielding with optimized performance. Journal of Thermoplastic Composite Materials. [0 citations; Article in Press]
  17. Hasanzadeh, R., Mihankhah, P., Azdast, T., Bodaghi, M., & Moradi, M. (2024). Process-property relationship in polylactic acid composites reinforced by iron microparticles and 3D printed by fused filament fabrication. Polymer Engineering and Science, 64(1), 399–411. [9 citations]